Technical Support

Ls588F/Ls599F

Assembly

1) The safety arm turn is “OPEN”, and turn right is “CLOSE”. (SEE PICTURE 1)

2) Please take off the bung then put on the spigot from the jar. (See picture 2)

3) When you put the filter into jar, please make sure the course must be fixed. Then put on the jar cover. (See picture 3)

4) When you want to close the jar cover, please remember to aim at the triangle from jar and jar cover. After that, turn right the safety arm to close it. (See picture 4)

Filter using

1) No.1 filter: it is used for thick fiber vegetable and fruit such as pasture, Grass, Soybean Milk, Rice Milk, and Watermelon juice.

2) No.2: It is used Tomato Juice, Grape Juice and Hot sup.

3) The thick fiber vegetable and fruit will do not need filter and add about 200cc water with the vegetable or fruit that you want to chop.

*This item is only with NO.1 and NO.3 filter , without NO.2 filter.

OPERATION

Please plug into the outlet first and the operation will be as below:

A) High Speed:
When you push the “HIGH” button, the motor will start to operate. The motor will stop automatic after 1 min. If you want to stop the motor while it is operating, push the “OFF” button.

B) Auto Button:
When you push the “AUTO” button, the motor will start to operate. The motor will operating for 4 sec then stop for 2 sec for total 5 cycles. After that the motor will continuous operate for 30 sec then motor will stop automatically with an alarm.

C) Pulse Button:
When you press down the “PULSE” button, the motor will start to operate but when your fingers leave the “PULSE” button, the motor will stop. Please do not continuous presses down “PULSE” button over 15 sec and the rest time is 10 sec .

REMARKS:

1) In program A and B, if you push the “OFF” button the motor will stop immediately while it is operating.

2) The motor has a safety switch, the blender jar must fit in (turn right) the safety lock in the main housing, if turn off the safety lock while the motor is operating then the motor will stop immediately.

Attention

1) Make sure the jar and jar cover fix correctly with the base before using.

2) Wait until the blade stop completely before open the jar cover.

3) This motor has temperature control when the temperature is over, the motor will stop automatically. When the temperature cool down (about 20mines), push back the button in the base bottom than the motor will return to normal.

4) Pull out the plug when not using machine.

5) Hold the plug.